AdderLink XD522 is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the same user desktop experience.
It can transmit either two 1920x1200 video streams or one higher resolution video stream (2560x1600 WQXGA), digital audio (S/PDIF), analog audio, Hi-Speed USB 2.0 and USB 2.0 (full and low speed) over CATx cables.
FEATURES:
Plug and play
150 meter extension distance for a single 1920x1080 screen
100 meter extension distance for two 1920x1200 screens or a single high resolution screen to 2560x1600
Supports Mac Cinema Display (2560x1440)
Now supports 4K resolutions (3840x2160 VESA)
USB 2.0 Hi-Speed for mass storage devices plus:
Keyboard, mouse tablet and touch
S/PDIF and analog audio
Perfect Digital Video, Real Time Control
The system is uncompressed, where by every pixel of every frame are sent without loss. The receiver supports Display Port Dual Mode (DP++) which means that monitors which only support HDMI or DVI can be used (with the correct adapter cable).
Single CATx Cable
Video, USB 2.0 (HID-only) and audio all pass along a single cable. A second CATx cable is required for the Hi-Speed USB 2.0 extension.
Up to 150 Metre Extension Distances
Distance is dependent on the monitor resolution, number of monitors, cable type and the number of connection breaks for patch panels and wall plates. See table on datasheet for details.
USB 2.0
Enables connection of any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can be used through the transparent USB 2.0 Hi-Speed port.
EDID Management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.
Plug and Play
The AdderLink XD522 extender is delivered in a zero config state so you can plug the units in and start working with them straight away. There is no need for drivers or software to be installed.
Digital Audio
Supports the S/PDIF interface via an optical 3.5mm jack socket (dual use with analog audio via mini Toslink).
HD Quality Analog Audio
HD audio quality (stereo channel 24 bit sampled at 96kHz) is available to transfer audio from local to remote for Line in / Line out. Microphone in and headphone use cases are also supported.
4K Resolution Support
Now supports 4K resolutions up to 3840x2160 (VESA timing).
It can transmit either two 1920x1200 video streams or one higher resolution video stream (2560x1600 WQXGA), digital audio (S/PDIF), analog audio, Hi-Speed USB 2.0 and USB 2.0 (full and low speed) over CATx cables.
FEATURES:
Plug and play
150 meter extension distance for a single 1920x1080 screen
100 meter extension distance for two 1920x1200 screens or a single high resolution screen to 2560x1600
Supports Mac Cinema Display (2560x1440)
Now supports 4K resolutions (3840x2160 VESA)
USB 2.0 Hi-Speed for mass storage devices plus:
Keyboard, mouse tablet and touch
S/PDIF and analog audio
Perfect Digital Video, Real Time Control
The system is uncompressed, where by every pixel of every frame are sent without loss. The receiver supports Display Port Dual Mode (DP++) which means that monitors which only support HDMI or DVI can be used (with the correct adapter cable).
Single CATx Cable
Video, USB 2.0 (HID-only) and audio all pass along a single cable. A second CATx cable is required for the Hi-Speed USB 2.0 extension.
Up to 150 Metre Extension Distances
Distance is dependent on the monitor resolution, number of monitors, cable type and the number of connection breaks for patch panels and wall plates. See table on datasheet for details.
USB 2.0
Enables connection of any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can be used through the transparent USB 2.0 Hi-Speed port.
EDID Management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.
Plug and Play
The AdderLink XD522 extender is delivered in a zero config state so you can plug the units in and start working with them straight away. There is no need for drivers or software to be installed.
Digital Audio
Supports the S/PDIF interface via an optical 3.5mm jack socket (dual use with analog audio via mini Toslink).
HD Quality Analog Audio
HD audio quality (stereo channel 24 bit sampled at 96kHz) is available to transfer audio from local to remote for Line in / Line out. Microphone in and headphone use cases are also supported.
4K Resolution Support
Now supports 4K resolutions up to 3840x2160 (VESA timing).
ADDERLink XD522 High Resolution DisplayPort, RS232 & HD Audio KVMA 100M Extender with USB2.0 over Single CATx Cable
- Brand: X Series
- Product Code:XD522-DP-PAIR